DIY Ford Bumper 1992-1997

A real recovery work bumper! Recovery point is direct bolted to frame with one piece of 3/4" thick A36 steel, to eliminate any failure points. Emergency hooks on top, for quick access until a Bow Shackle can be secured. Center section is 1/4" A36 one piece construction, with a weld on fairlead/hawse mount. Use tube, plate, or our prefabbed outter profile to finish the rest. Cut the hook off the top if you want a cleaner look for the road. Get the 1" thick model if you are a first responder or plan on using the top emergency hooks regularly. Three through bolts on each side, give this the strongest base for the 1987-1997 f250 f350 you can find. Also available in aluminum if weight or environment is a concern. *1987-1991 frame bolt spacer is required 1/2" id tube is best. *1992-1997 trimming factory bumper mount is required. WixomWorks logo and designs can be ommitted or changed.
 
Graphics or logos can be added for an additional surcharge of $100. This requires communication and additional time to finalize with customer. "WixomWorks" and american flag logo can be added at no cost, or moved to different locations or sizing. Please select these options at checkout.
 
DIY kit includes two frame supports, center section, and fairlead mount. Welding requiredd, finished assembly style is up to the builder.